-
-
EN
► The input voltage and lamps should be matched, after connecting the power line,Please make sure the wiring section is insulated.
► Do not look directly at the lamp when it is working. It should be used when no one is around.
► In order to ensure the bactericidal effect, please clean up the dust and stains on the luminous surface in time.
► No-professionals, must not install and disassemble the lamps.
► Keep the room clean and dry when disinfecting the air with ultraviolet light.When the indoor temperature is lower than 20℃ or the relative humidity is more than 60%, the irradiation time should be extended to ensure the disinfection effect.
| OPTICAL | Input Power | 80W |
| Radiant Flux | 155 uW/cm2±10% | |
| Tube type | G32q | |
| Peak Wavelength | 253.7nm±5% | |
| ELECTRICAL | Input Voltage | 120-277V Ac 50/60Hz |
| PF | ≥0.9 | |
| THD | ≤20% | |
| Housing | PC + metal | |
| Housing Color | creamy-white | |
| Driver Surge protection | L/N-PE: 1.6kV, L-N: 1.6kV | |
| OTHERS | Sensing Distance | 5m±5% |
| Operating Temperature | -5℃ TO 45℃ | |
| Operating Humidity | 20％-70％ RH | |
| Storage Temperature | -10℃ TO 80℃ | |
| Storage Humidity | 10％-75％ RH | |
| Warranty Time | 1 Years |
Copyright © 2019 Shenzhen SNC Opto Electronic Co.,Ltd All Rights Reserved
WeChat